Thermoplastic Polyester Elastomer (TPEE) 40D

خانه » فروشگاه » Thermoplastic Polyester Elastomer (TPEE) 40D
TPEE

Thermoplastic Polyester Elastomer (TPEE) 40D

0 out of 5
( هیچ دیدگاهی برای این محصول نوشته نشده است. )

افزودن به علاقه مندی ها

توضیحات

TPEE Product: This thermoplastic polyester elastomer, i.e. general purpose TPEE, has got high toughness and resilience, resistance to creep and fatigue. Its mechanical properties makes this material to be used in various application such as automotive for service condition of up to 120 °C and for short time up to 170 °C.

 

Process methods: Extrusion, injection molding

 

Uses: Automotive, home appliances, wire & cable, especial industrial applications

دیدگاهها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین نفری باشید که دیدگاهی را ارسال می کنید برای “Thermoplastic Polyester Elastomer (TPEE) 40D”

Physical Value                  Unit Standard
Hardness       40 Shore D ISO 868
Density       1.15 g / cm3 ISO 1183
Mechanical Value                  Unit Standard
Tensile Modulus       100 MPa     ISO 37
Tensile Strength at break                25 MPa     ISO 37
Elongation at Break       300 %     ISO 37
Thermal Value                  Unit Standard
Vicat Softening Temperature 10N, 50°C/h        175 °C      ISO 306

 

Remark: The data sheet prepared in this document is relating to our experience at the issued date. The results of tests are determined via specimens in our local company. Therefore, Kimia Bonyan Kia makes no warranties and assumes no liability with any applications. Clients shall perform themselves in local conditions.

محصولات مشابه